Used bauer oceanus e compressor iso#

Depend upon the reliability and stability of an established manufacturer of high pressure products.

Used bauer oceanus e compressor iso#

Both connections to the panel are male 37 degree flare JIC.Д«AUERвЂ™s quality system is registered to ISO 9001-2000, a unique distinction among manufacturers of products for paintball. Other than connecting the fill hose to the panel, only a connection to a regulated, high pressure air or nitrogen source is required for operation. The fill hose and fill coupling are available as individual replacement items.ДЇour mounting holes are provided for securing the panel to a flat, level surface. BAUER recommends inspecting the fill hose before each use.

The fill hose is completely external to the fill panel for easy inspection and replacement when required. The 5000 psi working pressure is stamped right on the coupling. The shutoff valve prevents hose whip if the fill panel is activated without the fill coupling being connected to a fill nipple. The fill hose includes the industryвЂ™s only 5000 psi rated quick-connect fill coupling with integrated shutoff valve. The fill hose is shipped loose from the panel. PIT BOSS II is available only in a tabletop design and with 1 fill hose. Competitive brand push-button fill panels do not include or offer a relief valve for overpressure protection. A metal plate with the factory setting stamped therein is wire-tied and sealed to the relief valve. PIT BOSS II is factory set to customer specified fill pressure and is protected from overpressure by a factory installed relief valve. BAUER recommends remote mounting the pressure regulator to prevent tampering with the setting. Regulators are available separately from BAUER. The high pressure supply line to PIT BOSS II must include a pressure regulator. PIT BOSS II is for use downstream of high pressure storage.

PIT BOSS II does not require a lot of effort. PIT BOSS II is low maintenance compared to competitive brand push-button fill panels which must be serviced every 300 вЂ“ 500 fills. PIT BOSS II is easy to operate and unlike competitive brand push-button fill panels that are hard to push and hold during filling. Low pressure air is not required for operation of PIT BOSS II. PIT BOSS II protects the tank and the markerвЂ™s regulator assembly from the problems associated with a rapid filling and venting sequence. PIT BOSS II is a push button operated fill panel that provides convenient refilling of paintball marker air tanks. It kills you and any of your loved ones nearby.ДЄs for the Pit BossвЂ¦. DonвЂ™t mess with 4500 PSI and over million joules of energy. Yes, I would have the tanks tested before use. If you run the motor backwards, the compressor will seem to work, but no have any lubrications -> badness. See that the fan rotation direction is correct. If yours differs, the wiring will be different.ДЄlso, check that your motor spins in the correct direction. Get it right for the voltage and number of phases. There is an entire procedure that Bauer spells out for reactivating a compressor that has been in storage.ДЄnother place to search for more experienced user advice is Д«TW, be sure you wire the motor appropriately for the type of motor it is.